Thanks to its low transport height, the HSM V-Press 818 can be easily transported to wherever it needs to be used.

To fill the press, the upper half of the doors is folded down The filling flap can then be used as storage and therefore facilitates filling Particularly suitable for filling with small-sized material Automatic start of the pressing process after closing the door

Counter-rotating thread for quick opening and closing Mounted at an ergonomic height Easy to handle Opening aid for expansive materials

Massive press ram and extremely robust press plate guidance.

Pressing procedure starts automatically upon closing the door. Upon opening the door a security switch assures an automatic stop of the pressing procedure.

The entire pressing cycle, beginning with closing the door, is fully automatic. A text display informs you in detail about the respective status of the process. When the pressing procedure comes to an end, the sliding door opens automatically. Extracting the bale is simple and easy, and it can be comfortably transported on a pallet.

Thanks to the newly developed HSM TCS (TorsionControlSystem), the angle of the press ram is minitored continuously in every direction avoiding one sided overcharge. Optimising the pressing procedure and assures longer service life.